en

NEWS

Latest news

View the latest news

The International Industrial Forum is the largest industrial fair organized by the Ukrainian industry and is known and respected for its high quality program. The conference covers areas like; Metal-Working, UkrMachTech, UkrWelding, UkrPlastTech, Hydraulics. Pneumatics, Hoisting and Transporting, Storehouse Equipment, Industrial Safety, Subcontracts, UkrUsedTech, UkrPromAutomation, Bearings and Patters, Standards and Instruments.

 TD Irbis our business partner and Koyo Distributor since 2004 combined forces with Koyo Germany and had a joint participation in the International Industrial Forum. TD Irbis was founded in 1990 and is one of the leading suppliers of the components for industry in Ukraine. They supply bearings, linear guides, chains, driving belts, conveyor belts, gear motors, filters, and components for industrial transmission, lubrication systems and lubricants, seals and provide technical services. Their mission is to cover every client’s needs by offering a wide range of products and services, which includes the best delivery conditions, technical support, diagnostics and modernization of units and mechanisms.

The booth was well designed with a contemporary look. Our Koyo bearings were displayed in a separate area. Koyo Germany representatives were also present during the fair to provide support whenever was needed. The booth was well visited by the public and professionals of this industry and we would like to thank Irbis for all their efforts and perfect organization at the fair.

TD Irbis head-office is located in Kharkov area, with 6 branch offices through Ukraine and one office in Russia. Visit their website: www.irbis.ua

Gallery

{gallery}irbisindustrialforum2015{/gallery}

Bearing 3D
FAQ

What is an angular contact ball bearing?

An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load. In high speed applications, such as turbines, jet engines, and dentistry equipment, the centrifugal forces generated by the balls changes the contact angle at the inner and outer race. Ceramics such as silicon nitride are now regularly used in such applications due to their low density (40% of steel). These materials significantly reduce centrifugal force and function well in high temperature environments. They also tend to wear in a similar way to bearing steel—rather than cracking or shattering like glass or porcelain.

Most bicycles use angular-contact bearings in the headsets because the forces on these bearings are in both the radial and axial direction.

For more information please click here “Products

You may communicate us your personal data in the frame of using our website. JTEKT Europe Bearings B.V. and its affiliates undertake to comply with the European General Data Protection Regulation (GDPR May 25th 2018) and shall process your data in compliance with GDPR. In case, you would like to proceed with your rights (refusal, information, access, erasure, restriction, portability), you can send a request to dpo.jeo@jtekt.eu. Our privacy policy is available at: www.jtekt.co.jp/e/privacy3.html

I understand