en

Contact us

Contact us

European Head office JTEKT Europe Bearings BV

We take great pride in the products we manufacture. If you have any comments or questions about our company, policies or website please contact us by filling in the contact form below or send us an email. 
 

 European Head office JTEKT Europe Bearings BV
Address: Markerkant 13-01
Postal code: 1314 AL
City: Almere
Country: The Netherlands
Phone: +31 (0)36 538 3333

 

Our JTEKT European Operations (JEO) contacts in Europe
For information about other JTEKT products and systems, like our steering systems and driveline products, please visit the JEO-website: https://www.jtekt.eu/

Our JTEKT contacts outside Europe
If you are from India or Pakistan, please contact: neeraj.kavidayal@jtekt.co.in 
if you are from the middle East region, please contact: info@koyo.ae
If you are from other non-European regions please find your global contact on our Global Network by clicking this link: https://koyo.jtekt.co.jp/en/network/

Our JTEKT Electronics contact.
If you are interested in our JTEKT electronic products, please contact: https://www.koyoele.co.jp/en/contact/ (+81-42-341-3111)

Our JTEKT Sales offices in Europe+
Contact one of our nearest JTEKT Sales office for inquiries or technical support and they will help you further. Click on the tabs below to get more details of each JTEKT sales office.

  

JTEKT authorized Distributors in (greater) Europe

If you are looking for your nearest JTEKT authorized Distributor you can click on this link to be forwarded to our: Distributor Network

 

Please do not use the below General Information Contact Form for sales inquiries, orders or technical product support. For such specific needs please directly contact one of the nearest JTEKT Distributors or JTEKT Sales Offices in Europe, or outside, which are listed above.

The below Contact Form is not intended for advertisings, unsolicited offers/advise/services or open job applications, which will be ignored.

 

General Information Contact Form - Europe

Bearing 3D
FAQ

What is an angular contact ball bearing?

An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load. In high speed applications, such as turbines, jet engines, and dentistry equipment, the centrifugal forces generated by the balls changes the contact angle at the inner and outer race. Ceramics such as silicon nitride are now regularly used in such applications due to their low density (40% of steel). These materials significantly reduce centrifugal force and function well in high temperature environments. They also tend to wear in a similar way to bearing steel—rather than cracking or shattering like glass or porcelain.

Most bicycles use angular-contact bearings in the headsets because the forces on these bearings are in both the radial and axial direction.

For more information please click here “Products”

You may communicate us your personal data in the frame of using our website. JTEKT Europe Bearings B.V. and its affiliates undertake to comply with the European General Data Protection Regulation (GDPR May 25th 2018) and shall process your data in compliance with GDPR. In case, you would like to proceed with your rights (refusal, information, access, erasure, restriction, portability), you can send a request to dpo.jeo@jtekt.eu. Our privacy policy is available at: www.jtekt.co.jp/e/privacy3.html

I understand